"After two other companies couldn't figure out our fire door, GDoB had it inspected and re-certified the same week."
Property Manager, Jekyll IslandSteel Entry Doors & Hardware
Hollow-metal steel entry doors, frames, panic bars, closers, and locksets. Commercial-grade, code-compliant, ADA-accessible.
Complete Commercial Openings.
Commercial entry openings are a system: door, frame, hinges, lockset, closer, panic device, weatherstripping, and threshold. Each component has code, fire, ADA, and security requirements. We supply, install, and service the whole assembly. Mesker Door authorized dealer.
- Hollow-metal commercial entry doors
- Steel and aluminum frames (knockdown and welded)
- Panic bars and exit devices (Von Duprin, Sargent)
- Door closers (LCN, Norton, Yale)
- Locksets and cylinders (mortise and bored)
- ADA-compliant hardware and operation
- Fire-rated door and frame assemblies
- Continuous hinges and pivot sets
Code Compliance Across the Whole Opening.
System Compatibility
Hardware must match door rating, frame prep, and code. We get all components from the same install and source.
Mesker Door Partnership
Authorized dealer with direct manufacturer support. Faster quotes, faster orders, real warranty.
Code & ADA
We know egress code, fire rating, and ADA requirements. Doors that pass inspection the first time.
Before You Call.
What is a panic bar?
A panic bar (or exit device) is the horizontal bar across the inside of an exit door that releases the latch when pushed. Required by code on most public-access exits.
Are your doors ADA-compliant?
Yes. We supply and install ADA-compliant assemblies including the right hardware operation force (5 lbs max), threshold heights, and clear opening widths.
Can you replace just the hardware, not the door?
Yes. We replace panic bars, closers, locksets, and hinges on existing doors as long as the door and frame are still structurally sound.
Do you do fire-rated entry assemblies?
Yes. Fire-rated steel doors and frames in 20-, 45-, 60-, 90-, and 180-minute ratings. Includes positive-pressure tested assemblies for stairwells.
How long does a typical entry door install take?
Single door retrofit: 2 to 4 hours. New construction with frame install: 4 to 8 hours per opening depending on hardware complexity.
Property Managers Trust Us.
"Service contract on our 14 dock doors. They show up quarterly, do the inspections, document everything. Zero emergencies in 18 months."
Operations Manager, Savannah Distribution"Property management calls. They handle our commercial doors and the NFPA fire inspections at our Coastal Georgia locations."
Building Manager, BrunswickWhere Steel Entry Doors Go to Work.
Hollow-metal steel doors, frames, and commercial hardware. The openings that everyday traffic, code inspectors, and security audits all care about. Mesker Door partner.
Schools & Public Buildings
Classroom, corridor, egress, and mechanical room doors for Glynn, Ware, Camden, Liberty, Bryan, Chatham, Duval, Nassau, and Clay school districts. Hollow-metal frames, panic hardware, ADA-compliant closers, and the hardware schedules to match.
Healthcare & Fire Stations
Exit doors, stairwell openings, and service-corridor doors at Southeast Georgia Health System, Memorial Health, Mayo Clinic, and Baptist Health. Plus bay doors and man-doors at fire stations across Coastal Georgia and NE Florida. Built to code, built to last.
Ports & Industrial Security
Security and access doors at the Port of Brunswick and JAXPORT facilities, plus mechanical room doors, electrical room doors, and warehouse pedestrian doors across the I-95 corridor. Heavy-gauge steel, high-security hardware, and the right rating.
Hospitality & Retail
Back-of-house service doors at The Cloister at Sea Island, Jekyll Island Club Resort, Ritz-Carlton Amelia Island, and downtown Savannah hotels. Plus retail receiving doors and restaurant kitchen openings. Quiet, secure, easy to service.
Ready for a Site Assessment?
We come to your facility, inventory every door, and quote service contracts or repairs in writing.
Call (912) 209-4079